NeXCell P870
Large Capacity CO₂ Incubator for Cell Production
Because of the increasing needs for regenerative medicine and cell therapy, CO2 incubator has been drawing more attention. We believe that our “NeXCell P870 (NP870)” contributes to efficient cell, virus, protein and exosome productions optimized with cell production culture method.
This incubater has a CE mark.
Details
- CE marking
NP870 observes some directions like RoHS direction, EMC direction and so on to obtain CE marking. - Specialized in Cell Production
NP870 has 870L of the chamber volume. Hence, 3 units of 250L incubator can be covered by 1 unit of NP870. In therms of IOQ costs for 250L incubators, the costs of NP870 must be less expensive and it can be als contribute to saving the costs. “The larger also serves of the smaller”. - Suitable for Cell Production Using multi-layer flasks
NP870 is suitable for cell culture application with multi-layer flasks such as CellSTACK(Corning) and CellFactory(Thermo Fisher)
3 models of NP870 are available (5/2/1 glass door model).1. 5 door model: 5 shelevs can soter max. 30 pcs of 10-layer flasks
The inner flass door minimizes the fluctuation of temp., CO2 concentration and humidity, when its outer door is open. Thus, it is suitable for sensitive cells.
2. 2 door model: 3 shelevs can soter max. 12 pcs of 10-layer flasks + 6 pcs of 40-layer flasks
3. 1 glass door model: the same as the 2 ddor model. - Superior Horizontality by Reinforced shelf boaard
The reinforced stainless-steel(SUS304) shelf board can bear up to 40kg without causing distortion and deflection. - Integrated HEPA filter
Approximately 10-15 minutes after closing the glass door, the chamber air reaches ISO class 5 air cleanliness - 7-inch Color Touch Screen
High Visible 7″ touch screen has access to all parameter settings, trend graph display and event log display. - Door heater
There is a door heater on the NP870 front door so that condensation hardly occurs.
This unprecedented feature can give the solutions to the customers who suffer from condensation problem that could lead to contamination.
Model Number | WKN-NP870-1D | WKN-NP870-2D | WKN-NP870-5D | |
---|---|---|---|---|
Number of chambers | 1 | |||
Chamber capacity (L) | 870 | |||
Temperature (℃) | Control range | Ambient +8 to +30 (max. 50) | ||
Resolution | 0.1 | |||
Uniformity | ±0.5 @37.0℃ | |||
Control accuracy | ±0.1 | |||
CO₂ (%) | Control range | 0.5 to 18.0 | ||
Resolution | 0.1 | |||
Control accuracy | ±0.5 | |||
CO₂ Sensor | IR | |||
Humidification | Natural evaporation | |||
Max Load Weight (kg) | 40 | |||
Shelves | Standard | 3 | 3 | 5 |
Maximum | 25 | 23 | ||
HEPA Filter | PTFE HEPA Filter | |||
Inner Glass Door | 1 door | 2 divided doors | 5 divided doors | |
Size of Shelf (mm) | 670(W) × 750(D) | |||
Control | 7" Color Touch Screen | |||
External Output | Analog 4-20mA, Alarm Contact | |||
Access Port | 2(Left/Right side, φ30mm) | |||
Material of Chamber | Stainless Steel 304 | |||
Power Supply | AC100-240V 50/60Hz 1100VA | |||
External Dimension (mm) | 840(W) × 930(D) × 1890(H) | |||
Internal Dimension (mm) | 720(W) × 800(D) × 1530(H) | |||
Net Weight (kg) | 290 |