| Item No.<\/th> | WAS-113<\/th>\n<\/tr>\n<\/thead>\n |
|---|---|
| External dimensions (W x D x H)<\/td> | 1,600 x 1,500 x 1,650 (Max. 1,850) mm<\/td>\n<\/tr>\n |
| Weight<\/td> | 1,070kg (Not including the special trolley and cart)<\/td>\n<\/tr>\n |
| Load capacity (Static weight)<\/td> | 200kg (Including flasks and the dedicated cart)<\/td>\n<\/tr>\n |
| Swing motion<\/td> | -5\u00b0 (right) to 135\u00b0 (-30\u00b0 to 50\u00b0, Optional) <\/td>\n<\/tr>\n |
| Tilt motion<\/td> | -20\u00b0 (front) to 30\u00b0 (back)<\/td>\n<\/tr>\n |
| Swing speed (as operation speed)<\/td> | 1 - 60\u00b0 \/ sec (not including the range of acceleration and deceleration speed)<\/td>\n<\/tr>\n |
| Tilt speed (as operation speed)<\/td> | 1 - 60\u00b0 \/ sec (not including the range of acceleration and deceleration speed)<\/td>\n<\/tr>\n |
| Shaking motion and direction<\/td> | Broadside reciprocal motion (Front to back, right to left, diagonal, rotation)<\/td>\n<\/tr>\n |
| Shaking speed<\/td> | Max. 100mm \/ sec (at 30mm \/ 100 rpm)<\/td>\n<\/tr>\n |
| Shaking width<\/td> | Max. 50mm<\/td>\n<\/tr>\n |
| Power<\/td> | AC200-230V 50\/60Hz 9kVA \n(AC380-440V, optional)<\/td>\n<\/tr>\n |
| Applicable containers<\/td> | 41\/52 layer flasks x 4 \n(10-layer flask x 8)<\/td>\n<\/tr>\n |
| Operation environment<\/td> | Temp.: 5 - 30 C \nHumidity: 50% or less (30C, no condensation) \nRecommendation: Horizontal flat floor, floor load capacity 1t \/ m2 or more<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n * NOTE: This device cannot be used in an equipment chamber equipped with a cooling source as this will cause condensation. It may also not be possible to use this device in an equipment chamber with extreme temperature variations. <\/div><\/p>\n |