Because of the increasing needs for regenerative medicine and cell therapy, CO2 incubator has been drawing more attention. We believe that our “NeXCell P870 (NP870)” contributes to efficient cell, virus, protein and exosome productions optimized with cell production culture method.
This incubater has a CE mark.<\/h4>\n\n![](\"\/eng\/wp\/wp-content\/uploads\/2022\/09\/ce-mark-42944_1280.png\")
\n<\/figure>\n<\/div>\nDetails<\/h5>\n\n- CE marking<\/strong>
NP870 observes some directions like RoHS direction, EMC direction and so on to obtain CE marking.<\/li>\n- Specialized in Cell Production<\/strong>
NP870 has 870L of the chamber volume. Hence, 3 units of 250L incubator can be covered by 1 unit of NP870. In therms of IOQ costs for 250L incubators, the costs of NP870 must be less expensive and it can be als contribute to saving the costs. “The larger also serves of the smaller”.<\/li>\n- Suitable for Cell Production Using multi-layer flasks<\/strong>
NP870 is suitable for cell culture application with multi-layer flasks such as CellSTACK(Corning) and CellFactory(Thermo Fisher)
3 models of NP870 are available (5\/2\/1 glass door model).\n1. 5 door model: 5 shelevs can soter max. 30 pcs of 10-layer flasks
\n2. 2 door model: 3 shelevs can soter max. 12 pcs of 10-layer flasks + 6 pcs of 40-layer flasks
\n3. 1 glass door model: the same as the 2 ddor model.<\/p>\n\nThe inner flass door minimizes the fluctuation of temp., CO2 concentration and humidity, when its outer door is open. Thus, it is suitable for sensitive cells.\n<\/li>\n
- Superior Horizontality by Reinforced shelf boaard<\/strong>
The reinforced stainless-steel(SUS304) shelf board can bear up to 40kg without causing distortion and deflection.<\/li>\n- Integrated HEPA filter<\/strong>
Approximately 10-15 minutes after closing the glass door, the chamber air reaches ISO class 5 air cleanliness<\/li>\n- 7-inch Color Touch Screen<\/strong>
High Visible 7″ touch screen has access to all parameter settings, trend graph display and event log display.<\/li>\n- Door heater<\/strong>
There is a door heater on the NP870 front door so that condensation hardly occurs.
This unprecedented feature can give the solutions to the customers who suffer from condensation problem that could lead to contamination.<\/li>\n<\/ul>\n\n\n
\n<\/figure>\n<\/div>\nDetails<\/h5>\n
Details<\/h5>\n\n- CE marking<\/strong>
NP870 observes some directions like RoHS direction, EMC direction and so on to obtain CE marking.<\/li>\n- Specialized in Cell Production<\/strong>
NP870 has 870L of the chamber volume. Hence, 3 units of 250L incubator can be covered by 1 unit of NP870. In therms of IOQ costs for 250L incubators, the costs of NP870 must be less expensive and it can be als contribute to saving the costs. “The larger also serves of the smaller”.<\/li>\n- Suitable for Cell Production Using multi-layer flasks<\/strong>
NP870 is suitable for cell culture application with multi-layer flasks such as CellSTACK(Corning) and CellFactory(Thermo Fisher)
3 models of NP870 are available (5\/2\/1 glass door model).\n1. 5 door model: 5 shelevs can soter max. 30 pcs of 10-layer flasks
\n2. 2 door model: 3 shelevs can soter max. 12 pcs of 10-layer flasks + 6 pcs of 40-layer flasks
\n3. 1 glass door model: the same as the 2 ddor model.<\/p>\n\nThe inner flass door minimizes the fluctuation of temp., CO2 concentration and humidity, when its outer door is open. Thus, it is suitable for sensitive cells.\n<\/li>\n
- Superior Horizontality by Reinforced shelf boaard<\/strong>
The reinforced stainless-steel(SUS304) shelf board can bear up to 40kg without causing distortion and deflection.<\/li>\n- Integrated HEPA filter<\/strong>
Approximately 10-15 minutes after closing the glass door, the chamber air reaches ISO class 5 air cleanliness<\/li>\n- 7-inch Color Touch Screen<\/strong>
High Visible 7″ touch screen has access to all parameter settings, trend graph display and event log display.<\/li>\n- Door heater<\/strong>
There is a door heater on the NP870 front door so that condensation hardly occurs.
This unprecedented feature can give the solutions to the customers who suffer from condensation problem that could lead to contamination.<\/li>\n<\/ul>\n\n\n
NP870 observes some directions like RoHS direction, EMC direction and so on to obtain CE marking.<\/li>\n
NP870 has 870L of the chamber volume. Hence, 3 units of 250L incubator can be covered by 1 unit of NP870. In therms of IOQ costs for 250L incubators, the costs of NP870 must be less expensive and it can be als contribute to saving the costs. “The larger also serves of the smaller”.<\/li>\n
NP870 is suitable for cell culture application with multi-layer flasks such as CellSTACK(Corning) and CellFactory(Thermo Fisher)
3 models of NP870 are available (5\/2\/1 glass door model).\n
1. 5 door model: 5 shelevs can soter max. 30 pcs of 10-layer flasks
\n2. 2 door model: 3 shelevs can soter max. 12 pcs of 10-layer flasks + 6 pcs of 40-layer flasks
\n3. 1 glass door model: the same as the 2 ddor model.<\/p>\n\nThe inner flass door minimizes the fluctuation of temp., CO2 concentration and humidity, when its outer door is open. Thus, it is suitable for sensitive cells.\n<\/li>\n
The reinforced stainless-steel(SUS304) shelf board can bear up to 40kg without causing distortion and deflection.<\/li>\n
Approximately 10-15 minutes after closing the glass door, the chamber air reaches ISO class 5 air cleanliness<\/li>\n
High Visible 7″ touch screen has access to all parameter settings, trend graph display and event log display.<\/li>\n
There is a door heater on the NP870 front door so that condensation hardly occurs.
This unprecedented feature can give the solutions to the customers who suffer from condensation problem that could lead to contamination.<\/li>\n<\/ul>\n\n
\n